Posts Tagged ‘Faulty Unit’
breville ikon blender 750 Assistive Guide
I’m not one for writing reviews. I either have to be madly in love with something or have the following happen in order for me to take the time and energy to do this. Because of my experience with this product, I am compelled to warn potential buyers.
I bought this blender about 2.5 years ago. I did not get it from Amazon, but that’s beside the point. It began to leak from the base, at which point, if I did not clean it EVERY time, mold and mildew would develop. I would have my husband tighten it, because I thought I wasn’t making it tight enough. Well, that wasn’t it. Shortly after, the “chrome” base began to blister and peel. I thought that my protein shakes, which leaked, had caused the peeling. I started to think about what might have been in the shakes! The company did replace the entire unit, which I was thrilled about. I thought that the company was making good on a “faulty” unit. Well, the new unit arrives, and it leaks, too. So, this is obviously not just a one-time-only issue. (Now, I see reading other reviews, this is a common problem). A couple of months after that, the base blistered and peeled AGAIN. Great. I never bothered to contact the company, because what was the point - were they going to send me a new blender every 9 - 12 months??? No. So, I kept it and figured that everything else worked, and I would just deal with the cleanup and cosmetic issues for (what I was hoping would be) several years. HeHem, bottom line - I just ordered a Vita-Mix. Why? Well, last week, the blender began to make grinding sounds. I looked over to find that my contents had turned black and the kitchen started to stink of burnt rubber! The base beneath the blades was insanely hot, the blades loosened from the base, and lubricant leaked into the blender contents. UGH! I go to my computer, thinking that I now had to order a replacement part. Guess what? They DON’T have ANY replacement parts for this thing! So, if your glass jar should break - you’ll be buying a new $200 blender! Two hours later, I went and did what I should have done from the very start - invest in a Vita-Mix. It may be a lot more expensive, but I won’t be spending $200 every 2.5 years for a new blender!
I will NEVER! (repeat - NEVER!) buy another Breville product again (and neither will my family or friends). They look very nice and sleek, but apparently that’s about it for their products. Functionally, they aren’t worth the cardboard that they come in. Oh, and when I was researching juicers, I found that people had very similar problems with the juicer as well. Breville buyers, be forewarned! Either save your money and go for something cheaper that you don’t mind replacing or make a wiser investement and go for something more expensive that will last a lot longer.
![]() |
Breville BBL600XL Ikon 5 Speed 750W Diecast Blender FRE US $144.95 End Date: Friday Mar-19-2010 20:50:58 PDT |
![]() |
BBL600REF: Breville Ikon Blender - refurbished US $118.35 (0 Bid) End Date: Sunday Mar-21-2010 1:32:16 PDT |
![]() |
Breville Ikon Hemisphere LCD Blender BBL600XL NEW US $199.95 End Date: Tuesday Mar-23-2010 9:54:05 PDT |
![]() |
BREVILLE BBL600XL Ikon 750 Watt 51oz Blender BOXED $250 US $139.99 End Date: Monday Mar-29-2010 7:01:34 PDT |
Recent Uploads tagged brevilleikonblender750
Read the rest of this entry »

kitchenaid mixer blender Free helpful Knowledgebase
My KitchenAid Professional 600 stand mixer started malfunctioning about a month ago. It is only about 18 months old, and would go with full speed no matter what speed I have dialed in then shut off by itself after maybe about 10 seconds of running. I ran some intense online search and found many other KitchedAid owners have run into a similar issue. Here is a summary of the options with solutions, comments, and what I ended up with for this particular problem:
1. Some say go buy an other-than-KitchenAid mixer since those newer KitchenAid products are no longer built by the same manufactory (Hobart).
2. Some paid for service and cost ranging from $[...] to $[...]on top of the $[...] S&H if out of manufacturing warrantee (1 year from the date of purchase).
3. Some paid for parts and fixed theirs with information posted here: [...]
4. I ended up getting a replacement from Williams-Sonoma with an updated model - a Williams-Sonoma’s exclusive 610. Yes, they back up their 100% satisfaction warrantee and replaced my faulty unit 18 months after the date of my purchase.
KitchenAid stand mixer is not as tough anymore. Too many of these failed after 1 year of use. I would only buy this mixer from Williams-Sonoma with the `100% satisfaction’ guarantee since it is expensive and service is costly. This will save me not just money but hassle.
![]() |
NEW Kitchenaid 9 cup Food processor KFP740CR KFP740 NIB US $179.99 End Date: Saturday Mar-20-2010 7:25:27 PDT |
![]() |
KitchenAid KSB3 Classic 3-Speed Blender US $25.00 (0 Bid) End Date: Sunday Mar-21-2010 12:32:48 PDT |
![]() |
KITCHENAID STAND MIXER ATTACHMENT PACK BLENDER NEW FPPA US $99.99 End Date: Sunday Mar-21-2010 13:58:59 PDT |
![]() |
KitchenAid KHM5APER Ultra Power Hand Mixer US $55.00 (0 Bid) End Date: Sunday Mar-21-2010 17:17:19 PDT |
GoArticles Advanced Search Results
GoArticles.com is an article resource site for Authors, Publishers and Webmasters which provides the best collection of expert articles available on the Web
Kitchenaid Artisan KSM150BAC
Superior quality craftsmanship and classy looks, makes the new KitchenAid Artisan KSM150BAC an ultimate mixture. A kitchen...
Read the rest of this entry »

breville blender bbl600xl Useful Fact
I’m not one for writing reviews. I either have to be madly in love with something or have the following happen in order for me to take the time and energy to do this. Because of my experience with this product, I am compelled to warn potential buyers.
I bought this blender about 2.5 years ago. I did not get it from Amazon, but that’s beside the point. It began to leak from the base, at which point, if I did not clean it EVERY time, mold and mildew would develop. I would have my husband tighten it, because I thought I wasn’t making it tight enough. Well, that wasn’t it. Shortly after, the “chrome” base began to blister and peel. I thought that my protein shakes, which leaked, had caused the peeling. I started to think about what might have been in the shakes! The company did replace the entire unit, which I was thrilled about. I thought that the company was making good on a “faulty” unit. Well, the new unit arrives, and it leaks, too. So, this is obviously not just a one-time-only issue. (Now, I see reading other reviews, this is a common problem). A couple of months after that, the base blistered and peeled AGAIN. Great. I never bothered to contact the company, because what was the point - were they going to send me a new blender every 9 - 12 months??? No. So, I kept it and figured that everything else worked, and I would just deal with the cleanup and cosmetic issues for (what I was hoping would be) several years. HeHem, bottom line - I just ordered a Vita-Mix. Why? Well, last week, the blender began to make grinding sounds. I looked over to find that my contents had turned black and the kitchen started to stink of burnt rubber! The base beneath the blades was insanely hot, the blades loosened from the base, and lubricant leaked into the blender contents. UGH! I go to my computer, thinking that I now had to order a replacement part. Guess what? They DON’T have ANY replacement parts for this thing! So, if your glass jar should break - you’ll be buying a new $200 blender! Two hours later, I went and did what I should have done from the very start - invest in a Vita-Mix. It may be a lot more expensive, but I won’t be spending $200 every 2.5 years for a new blender!
I will NEVER! (repeat - NEVER!) buy another Breville product again (and neither will my family or friends). They look very nice and sleek, but apparently that’s about it for their products. Functionally, they aren’t worth the cardboard that they come in. Oh, and when I was researching juicers, I found that people had very similar problems with the juicer as well. Breville buyers, be forewarned! Either save your money and go for something cheaper that you don’t mind replacing or make a wiser investement and go for something more expensive that will last a lot longer.
![]() |
Breville BBL600XL Ikon 5 Speed 750W Diecast Blender FRE US $144.95 End Date: Friday Mar-19-2010 20:50:58 PDT |
![]() |
Breville Ikon Hemisphere LCD Blender BBL600XL NEW US $199.95 End Date: Tuesday Mar-23-2010 9:54:05 PDT |
![]() |
BREVILLE BBL600XL Ikon 750 Watt 51oz Blender BOXED $250 US $139.99 End Date: Monday Mar-29-2010 7:01:34 PDT |
![]() |
Breville BBL600XL ikon Hemisphere LCD Blender US $84.99 End Date: Saturday Apr-10-2010 9:46:55 PDT |
GoArticles Advanced Search Results
GoArticles.com is an article resource site for Authors, Publishers and Webmasters which provides the best collection of expert articles available on the Web
Read the rest of this entry »

Top resources for breville bbl600xl ikon 750 watt 51 ounce blender online
I’m not one for writing reviews. I either have to be madly in love with something or have the following happen in order for me to take the time and energy to do this. Because of my experience with this product, I am compelled to warn potential buyers.
I bought this blender about 2.5 years ago. I did not get it from Amazon, but that’s beside the point. It began to leak from the base, at which point, if I did not clean it EVERY time, mold and mildew would develop. I would have my husband tighten it, because I thought I wasn’t making it tight enough. Well, that wasn’t it. Shortly after, the “chrome” base began to blister and peel. I thought that my protein shakes, which leaked, had caused the peeling. I started to think about what might have been in the shakes! The company did replace the entire unit, which I was thrilled about. I thought that the company was making good on a “faulty” unit. Well, the new unit arrives, and it leaks, too. So, this is obviously not just a one-time-only issue. (Now, I see reading other reviews, this is a common problem). A couple of months after that, the base blistered and peeled AGAIN. Great. I never bothered to contact the company, because what was the point - were they going to send me a new blender every 9 - 12 months??? No. So, I kept it and figured that everything else worked, and I would just deal with the cleanup and cosmetic issues for (what I was hoping would be) several years. HeHem, bottom line - I just ordered a Vita-Mix. Why? Well, last week, the blender began to make grinding sounds. I looked over to find that my contents had turned black and the kitchen started to stink of burnt rubber! The base beneath the blades was insanely hot, the blades loosened from the base, and lubricant leaked into the blender contents. UGH! I go to my computer, thinking that I now had to order a replacement part. Guess what? They DON’T have ANY replacement parts for this thing! So, if your glass jar should break - you’ll be buying a new $200 blender! Two hours later, I went and did what I should have done from the very start - invest in a Vita-Mix. It may be a lot more expensive, but I won’t be spending $200 every 2.5 years for a new blender!
I will NEVER! (repeat - NEVER!) buy another Breville product again (and neither will my family or friends). They look very nice and sleek, but apparently that’s about it for their products. Functionally, they aren’t worth the cardboard that they come in. Oh, and when I was researching juicers, I found that people had very similar problems with the juicer as well. Breville buyers, be forewarned! Either save your money and go for something cheaper that you don’t mind replacing or make a wiser investement and go for something more expensive that will last a lot longer.
![]() |
BREVILLE BBL600XL Ikon 750 Watt 51oz Blender BOXED $250 US $139.99 End Date: Monday Mar-29-2010 7:01:34 PDT |
![]() |
Breville BBL600XL Ikon 750Wt 51-Ounce Blender *NEW* US $200.66 End Date: Tuesday Apr-13-2010 0:52:00 PDT |
![]() |
Breville BBL600XL Ikon 750-Watt 51-Ounce Blender US $199.95 End Date: Tuesday Apr-13-2010 18:24:42 PDT |
Read the rest of this entry »












black and decker blender parts Assistive Guide